3DXMax™ HIPS Support Material

Manufactured in the USA from 100% virgin HIPS (High Impact Polystyrene) resin.

Filament diameter specs:

• 1.75mm +/- 0.05mm

Recommended Print Conditions:

• Extruder: 220 - 235°C  [printing with higher temps will make a stronger / tougher support, which may be more difficult to remove]
• Bed Temp: 100-110°C
• Bed Prep: Kapton Tape, ABS/Acetone Slurry on clean glass
• Dissolves easily in d-Limonene orange solvent