FD5 Filament Dryer
The latest generation rotary desiccant dryer for thermoplastic filaments.
The FD5 filament dryer provides an all-around improvement on the original FD1 model. It boasts a bigger spool capacity and higher drying temperature – as well as a simplified touchscreen interface.
Print Superior Parts
Many different types of polymers absorb moisture for the atmosphere. Not only does this lead to condensation at the surface of the material, but with time it can also work its way inside the material – forming hydrogen bonds polar functional groups in the polymer.
This can heavily impact the processing of polymers, resulting in prints that are significantly less accurate and precise than if the water was absent.
This is where the FD5 filament dryer excels. It allows for much more stable processing and the creation of parts with:
- Higher dimensional stability
- Improved mechanical properties
- Less part warping
- Fewer cosmetic defects
- Allows the use of performance thermoplastics
- Far fewer moisture-related printing problems
- Allows the use of highly moisture-sensitive materials
- The temperature will not be affected by environment moisture
- Quality and stability of prints will be greatly improved
Why It’s Better Than an Oven
The main difference between the FD5 and an oven is a desiccant disc, used to reduce the water content in the absorbed air. The lower is the moisture content in the incoming air, the more efficiently it can absorb the evaporating moisture from the 3D printing filament
The use of partially dehumidified air is what gives the FD5 its distinct advantage over more traditional drying technologies.
Feed filament directly from the filament dryer to your 3D printer via teflon tuble. This ensures minimum exposure to outside conditions and increases process stability.
Rotary desiccant technology
Rotary desiccant renewal technology doesn’t require regular replacement of the desiccant and allows greater drying efficiency when compared to conventional hot air dryers.
Compatible with most open-materials 3D printers
Mass Portal Filament dryer FD1 is compatible with most open-materials 3D printers and can be used with filaments of up to 3 mm in diameter.
Air filtering & Safety
The filament dryer features HEPA & active carbon air filters to reduce escaping fumes and small particles. Open door sensor ensures that the dryer won’t operate with open doors. The filament dryer also features overheating protection.
The glass front door with extending centre axis allows for quick and easy loading of filament spools.
Fully insulated metal case
The filament dryer uses an insulated all-metal body and tempered glass door for greater insulation and durability.
We Also Recommend